John,
MacDoppler, SATPC32, Ham Radio Deluxe, and other programs all support what has been called the One True Rule. The usual name for the implementation is Full Doppler Tuning. You are doing it right. When everyone does this, it provides a very pleasant opportunity to talk instead of tune. It also keeps from drifting all over another QSO, though the transponders are seldom full these days.
However, that is not to say that people not using this are doing it wrong, exactly. There are still many rigs in use which do not have the capability for computer frequency control. In the old days, the rule was to tune the highest frequency, whether uplink or downlink, since this is where the Doppler shift is greatest. Take a look at KB5MU's original article and updates here:
http://www.amsat.org/amsat/features/one_true_rule.html
My suggestion is to use full tuning until you find that the other operator isn't. Then adapt, usually by turning off the updating for the lower frequency. It isn't worth getting doctrinaire about it. However, by using the One True Rule as the default, you set a good example and encourage the movement of other operators in this direction. As you will find, it is truly painful to do it the manual way after getting used to automagic tuning. As we move above 70 cms, full tuning truly becomes necessary.
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of John Belstner Sent: Monday, May 31, 2010 3:36 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Doppler Tuning Convention Question
I know there is a lot of discussion on this subject in the AMSAT archives, but I've recently read a few posts to the BB that have me confused.
Just this weekend I got my Sat station on the air (FT-736R w/MacDoppler) and I noticed that the MacDoppler program I use adjusts both the TX and RX frequencies during the satellite pass. I'm assuming this is to keep my signal located in the same place in the transponder. The program seemed to work quite well. I was able to copy several QSO's on VO-52 and made a couple contacts as well.
One thing I noticed is that about half the QSO's I copied did not require any manual tuning on my part (MacDoppler adjusted the RX correctly) while the other half did. According to MacDoppler, those that did require manual tuning were moving around within the transponder passband.
I've read a few posts (one as recent as today) that suggested the convention is to keep the RX frequency fixed and manually adjusting the TX frequency while monitoring the downlink. Looking through the AMSAT archives this is the old convention prior to the popularity of tracking software and CAT control. So my question is, are there two conventions? or do I not have my software configured correctly?
Sorry for what might seem like a stupid question, but I'm a newbie to this facet of Ham Radio. BTW, I'm having a blast!
Cheers,
John Belstner w9en@arrl.net
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb