Hi all,
A quick update to my new project to improving the Arrow antenna, efficiency wise. I wanted to see how well it would perform on gaining and losing access during AOS and LOS. AO-27 is not a good choice since the timer is turned on when it is well above the AOS horizon and it is switched off before it reaches its LOS horizon. That leaves a dependable AO-51 to test it out.
With the last setup, the OEM diplexer provided by Arrow Antenna, I would copy AO-51 about 3 minutes after AOS and lose it about 3 to 4 minutes before LOS. Not bad, but people were saying they worked the birds when they were 1 degree off of the horizon. I have some pine trees that could be an issue but they are spaced far enough apart that I can work between them and I also have to deal with the McCollough Range to the SSE of me here in Las Vegas, NV. Today, there were 2 passes of AO-51, one at 12 degrees elevation, the other at 74 degrees. During both passes, I began to copy the downlink about a 1.25 minute after AOS. A considerable difference from 3 minutes. The downlink also improved down to about minute before LOS. On the last pass I worked KG6NUB at 0124z and LOS was 0125z and my downlink sounded fairly good, though I was fighting desense. (That's another issue I need to resolve.) Also, on both passes, I never once lost the downlink. No dropouts or fades. I'm still amazed.
Another issue I came across was how wide the beamwidth is of the Arrow Antenna between the Arrow diplexer and the new diplexer. I was wondering if this was going to happen and it did. The reason that this happened was with the old diplexer, the signal attenuated so much that you had to be pointed right smack dab on the bird, a few degrees off and you lost the signal. Now, with the new diplexer, you can point the beam in the general direction and still copy the bird. In most cases I had to turn the beam 90 degrees before I completely lost the downlink! Twisting the antenna to make polarization changes makes absolutely no difference now. This also attributes to the fact that now I'm copying the entire pass without dropouts or fades. Makes sense. What I've regained over the lossy diplexer makes up for any polarization differences, etc. for a better copiable signal.
Next weekend I will have to try more passes and get a feel of how much this system has changed.
73,
Jeff WB3JFS Las Vegas, NV DM26