SDR Dongle says I'm getting out. And if I whistle, I can deflect the Bird meter. Thanks everyone for your help. I was worrying for nothing.
On Fri, Aug 11, 2017 at 3:45 PM, Zach Metzinger zmetzing@pobox.com wrote:
On August 11, 2017 1:19:46 PM CDT, Floyd Rodgers kc5qbc@swbell.net wrote:
Try AM mode and the meter should register or get another meter that can measure ssb
On Friday, August 11, 2017 8:15 AM, Andrew Rich vk4tec@internode.on.net wrote:
I talked my test equipment mate
You would have to whistle fairly loudly to get a swing on the bird
Andrew
Sent from my iPhone
On 11 Aug 2017, at 10:28 pm, Peter Pauly ppauly@gmail.com wrote:
I do have a little USB SDR. I plan hook that up tonight to see if I
can see an indication of signal. I don't want to furiously try to contact someone via satellite and find out I'm not putting out any power.
I've never owned this rig until a couple days ago so there's always a
possibility I'm doing something wrong.
On Fri, Aug 11, 2017 at 8:23 AM, Andrew Rich
vk4tec@internode.on.net wrote:
Peter are you speaking loudly
The energy in an fm envelope is way larger than a side band
transmission
The fact that your reaching an alc level seems to indicate the radio
is doing its job
Pity u don't have USB rx
Do you have a software defined radios ?
Andrew
Sent from my iPhone
On 11 Aug 2017, at 10:02 pm, Peter Pauly ppauly@gmail.com wrote:
I bought a used IC-910H on ebay for satellite work an am having a
possible
issue with it.
I tested the 2m and 70cm transmitter and receiver in FM mode with
my
handheld and they work fine. I hooked up a Bird 43 wattmeter with
a 50E
slug (50W, 400-1000Mhz) and when I transmit on 440Mhz FM I get an indication of power output on the meter. So far so good...
Then in USB/LSB mode however, I get no indication on the meter,
despite
turning the mic gain up and talking into the mic. I've also up'ed
the RF
power with the little knob and that doesn't help. The red light
flashes on
the rig (ALC indication) and the meter on the rig moves. I can
also hear
distorted audio on my FM handheld (as expected since it's FM and
not USB)
but I'm worried about the lack of power indicated on the Bird. I
haven't
been able to try CW yet because I don't have the right sized plug.
Should I
be concerned about the lack of power?
Summary: Bird wattmeter shows power out on FM, but not on
USB/LSB.
Thanks
Peter W9KG _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum
available
to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
If your rig has a RTTY mode, switch to that and key down. You should get a full power tone with no actual data modulating it.
73,
--- Zach N0ZGO --- Zach _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb