Thanks for the things to check. If it will go wrong, I will be the one to find it.
Ron
George Henry wrote:
- In the Radio setup, do you have the "Satellite Mode" box checked? 2) You must enter the appropriate radio address in 2 columns... also, what baudrate are you using and what have you entered for the CAT delay? (Print out the radio hints for Icom users, found under the "?" menu, and use them as a checklist.)
I am surprised that you are having difficulty with SatPC32 and the 910H - my setup has played together beautifully from day one.
73,
George, KA3HSW
-----Original Message-----
From: Ronald Nutter [email protected] Sent: Apr 15, 2008 11:52 AM To: [email protected] Subject: [amsat-bb] SatPC32 and ICOM 910H question
I am trying to learn how to use SatPC32 for Doppler correction on the SSB birds. I have run into a "brick wall" in terms of how it is operating that is giving me some fits.
When I put SatPC32 into CAT mode, the radio shifts into the appropriate frequencies but it wont transmit on the right band. When I press the M/S to swap the displays around so that it will transmit on the correct band, the radio stops adjusting to what is shown on the SatPC32 display.
Can someone point out what I am doing wrong or do I need to change to one or more of the config files in SatPC32 ?
Thanks, Ron KA4KYI
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb