Hello Howard,
From the cable length that you measure it looks like 3/4 Lambda instead of 1/4 Lambda which is too short for convenience working. From the electrical point of view it is the same, assuming low loss coax.
David 4X1DG ----- Original Message ----- From: Howard Kowall To: AMSAT BB Sent: Wednesday, March 23, 2011 3:28 PM Subject: [amsat-bb] Cushcraft 416-TB
Hello All I acquired a Cushcraft 416-Tb antenna,the so called phasing harness was in bad shape,so I am going to make a new one for it. I could copy the original one,but yes I am making it hard on myself and decide to calculate the proper cable type and length,and to do that I need to know how the antenna actually works.Here is my problem ,the 2 driven elements have a balun to each of the Tmatchs to make the impedance 50 ohms on each driven element.The original phasing harness is 2 piece of 75 ohm aprox 13" that goes to each driven element and the a so239 connector on the other end of the harness is the 50 ohm feedline.I originally thought this was a matching stub,but when I do the calculation for the matching stub,should only be aprox 4" to each driven element.Am I missing something here,how are they able to do this,does anyone know this antenna and how it works. Thanks to all who read and respond in advance Howard VE4ISP
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb