Paul,
You need to make entries in the doppler.sqf file with the frequency info. Here's a write up that should help you out.
amsat-uk.org/2013/11/23/adding-new-satellites-to-satpc32/amp/
Also there's a Doppler.sqf line generator that's on the AMSAT website where you plug in frequencies and modes and it will generate the proper info.
https://www.amsat.org/doppler-sqf-line-generator/
Dave-KB1PVH
Sent from my Galaxy S9
On Wed, May 6, 2020, 4:40 PM Paul Mcl via AMSAT-BB amsat-bb@amsat.org wrote:
Apologies for what could be an easy question but I am a bit new to this. Just getting the station set up at the moment.
I have installed SAT32PC and have it tracking a number of the amateur satellites. I have noticed a few sats including PO101, CAS4A and 4B don’t have any frequency info shown in the window above the map.
Not sure how to resolve this so any help appreciated.
Thanks
Paul MM0ZBH _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb