Hi All, Well finally everything is working great using the Data2 socket, once I got all the connections PTT, audio in/out into the Data2 socket.  I am using hs_soundmodem and PacSat Ground Station. The tricky part for me was getting the audio IN level correct, David,4X1DG suggested using an O-Scope to set this level. I found that .25V p-p was the sweet spot, and after that it has been working great. Thanks to all for the great suggestions, special thanks to David,4X1DG and Mark,N8MH.

 

73,

Carm,WO3T

 

PS: I forgot to mention I am using an RigBlaster NOMIC to key the 9100, it is what I had on hand.

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org