Hi Thu,
Happy New Year to you as well!
I don't have a TS-2000 myself, but that rig should be fully capable of working the ARISSat-1 transponder, many hams use the rig for AO-07 and VO-52 which work essentially the same way as ARISSat.
The challenges (above copying the downlinks as you're doing now) are that you'll need to have the uplink (70cm) antenna working, as well as have the computer control of doppler for up/down on your rig. SatPC32 works well for this. Also, signals through the transponder are very weak, so you'll need to have some gain in the antennas and/or power on the uplink.
On a related note, I had a nice (short!) QSO with N6EV tonight through the transponder -- 01/01/2012 0124z. It's super-exciting to hear another station coming through the passband!!! ARISSat-1 may not have much time left, but it's still working great.
73 and Happy New Year all,
Dave KB5WIA
On Sun, Jan 1, 2012 at 4:43 AM, Vu Trong Thu thuvt@fpt.edu.vn wrote:
Happy New Year!
This morning I kicked off the new year with 2 passes of ARISSat-1, copied both CW beacon, BPSK telemetry and FM voice/SSTV simultaneously on Kenwood TS-2000. I would also like to try the transponder but don't know if my transceiver allow it? This TS-2000 has all modes on its main transceiver but its sub receiver only supports AM or FM. Could anybody help?
Thanks, Thu XV9AA
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb