![](https://secure.gravatar.com/avatar/a7703b16767b66344bf8ff8c1fdc023c.jpg?s=120&d=mm&r=g)
15 Nov
2007
15 Nov
'07
2:46 a.m.
... need help with the pcsat path. I understand that we are to use WIDEn-n but I can not get digi. I have tried these UNPROTO commands [with my D700]: CQ VIA WIDE2-2 ARISS VIA PCSAT-1 ARISS VIA WIDE2-2 WIDE2-2 VIA PCSAT-1
Only the first will work correctly. The next two will "work" (get digipeated) but most APRS software will ignore the packets because all APRS packets must be addressed to CQ, BEACON, QST, or APxxxx as the AX.25 TOCALL. The last one wont work.
The UNPROTO path in a TNC consists of a TOCALL and the VIA PATH. When PCSAT-1 is properly configured, it expects one of the TOCALLS above and a PATH via WIDEn-N (usually WIDE2-2).
Bob, WB4APR