----- Original Message ----- From: "Juan Antonio Fernandez" ea4cyq@gmail.com To: amsat-bb@amsat.org Sent: Wednesday, June 01, 2011 11:04 AM Subject: [amsat-bb] G5500 change voltage supply
I have purchased a G5500. The control box have a 117Vac label in the real panel. I opened it and a wire is connected through the fuse to the terminal number 3 of the KT-30 transformer and the other wire through the main switch to the terminal number 1 of the KT-30 transformer.
I am wondering how I should connect it to work with 220Vac in Europe.
Thanks in advance. ea4cyq@amsat.org
Hi Juan Antonio, EA4CYQ
Happy to hear from you again ! How many wires comes out from the primary winding of the KT-30 transformer ?
If the primay winding of KT-30 transformer has only two wires the number 3 and the number 1 then it has been winded to work only with 117 Vac and in this case you need an external autotransformer 220/117 to supply the control box.
On the reversed side if the primary winding of the KT-30 transformer has four wires it means that the primary has been made with two separate windings of 117 Vac each so that is you connect two windings in parallel you can supply it with 117 Vac and if you connect two windings in series with the correct phase relationship you can supply it with 220 Vac
Best 73" de
i8CVS Domenico