Hi Mike,
I use a VX-6R, but you can do the same to program your VX-7R for odd splits (your manual pg. 46).
1. in VFO mode, store your receive frequency into a memory channel (AO-51 V/U mode 435.300 MHz)
2. in VFO mode, turn to your transmit frequency (AO-51 V/U mode 145.920 MHz)
3. press and hold the MON/F key for a 1/2 second and release
4. withing 5 sec of performing step 3. dial to the memory channel number stored in step 1.
5. press and hold the PTT switch and then press the MON/F key to store the odd split frequency
6. your memory channel will show a +/- repeater shift indicating independently stored transmit/receive frequencies.
I've programmed several memory channels to compensate for doppler at 5 kHz intervals (AO-51 V/U mode 425.310, 425.305, 425.300, 425.295, 425.290)
I hope this helps.
73's Peter VE7NGP
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Michael Sent: Monday, November 29, 2010 7:06 AM To: amsat-bb@amsat.org Subject: [amsat-bb] Yaesu VX-7R
I was wondering if anybody has used a Yaesu VX-7R for Satellite use? I'm having troubles programming it and was wonder if it was worth the investment in a USB cable and software ? Thanks in advance ! Mike N8GBU _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb