Bob, the elevation problem has nothing to do
with SatPC32. Up to program version 12.8d the program doesn't
control the GH controller directly. The GH tracker or
PStRotator, which are used with the controller, evaluate the DDE
string sent by SatPC32. The string only outputs the true
elevation (0...90). All other features have to be done by the
client programs.
Wtth vers. 12.9 I have added direct support of the GH RT-21
controller to the program. However, SatPC32 doesn't not provide
to limit the elevation to values below 90. I don't know whether
the controller firmware will do that.
73s, Erich, DK1TB
On 4/5/2021 11:25, Marshall Toburen wrote:Bob, I'm using a Green Heron Az/El with an Alpha Spid and SatPC32. Interface has worked flawlessly for 2 years with Max El at 90 degrees and Min El at 0.Indeed. Yes, mine does that also. Flawlessly too. Thanks to Erich. Perhaps my old brain didn't correctly formulate the issue. In some parts of the 3-D Arc, "If" I allow the yagis to elevate more than 50 degrees then the antennas will surely be driven and wedged against the sloping roof. I have set these parameters into, or through, the RT-21. Yet I just saw the antenna elevate to 86 ... quite fortunately the Azimuth was such that the fed-end of the yagis was way south of the roofline. This time. -- 73 Bob KD7YZ ----------------------------------------------------------- Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/ View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org