Tom,

Is working well alongside my version of SatPC32 12.9

Colin VK5HI.

From: tjschuessler--- via AMSAT-BB <[email protected]>
Sent: Sunday, 27 November 2022 11:19
To: 'AMSAT-BB' <[email protected]>
Subject: [AMSAT-BB] Re: SatPc32ISS problems with GREENCUBE

Do I have to upgrade the whole SatPC32 package to version 12.10, or does this …ISS executable work with the latest 12.9 version?

From: Calvin McDonald <[email protected]>
Sent: Saturday, November 26, 2022 1:25 PM
To: Erich Eichmann <[email protected]>; AMSAT-BB <[email protected]>
Subject: [AMSAT-BB] Re: SatPc32ISS problems with GREENCUBE

Erich,

Likewise, worked perfectly for me as well.  I even got a ZL station!
Thanks again for the SatPC32ISS-2 update.

Cal - N7AY

On 11/26/2022 11:21 AM, crohtun--- via AMSAT-BB wrote:

Erich,

I used the updated software for the GREENCUBE pass that started about 1420z today. Everything seemed to work well — 13 QSOs including four with Japanese stations. Thanks for your efforts!

73,

Ray KN2K


Sent from the all new AOL app for iOS

On Saturday, November 26, 2022, 6:13 AM, Erich Eichmann <[email protected]> wrote:

Hi,
I have uploaded a revised SatPC32ISS.exe, which hopefully fixes the SatPC32ISS problems  with GREENCUBE (frequency drift etc.). Also, it supports USB-D/LSB-D.

The file can be downloaded here:
www.dk1tb.de/SatPC32ISS_2.exe

or as zip file here:
www.dk1tb.de/SatPC32ISS_2.zip

Simply copy the file  into the SatPC32 program folder (usually C:\Program Files (x86)\SatPC32). Because of the different name, it will not overwrite your current SatPC32ISS. Start the program with the Windows Explorer. It will switch the radio into SPLIT mode (unless the radio is already in Satellite mode).

In menu CAT specify the CAT interval and save the change (the file does no longer share its CAT interval with the FM interval of the normal SatPC32 as it did previously).  Don't set the interval too low!  In  Non-Satellite mode the radios (at least most as far as I know) go mute for the fraction of a second, when the frequencies are updated via CAT command. SatPC32ISS has to do that for Doppler correction.   That can cause data losses, if packet data is received at that time. The pre-set 50 Hz interval seems to be a good value.

The new file supports also FM-D. The entry in Doppler.SQF has to be FMD, the entries for USB-D an LSB-D) have to be USB-D and LSB-D.

If everything works, I will upload new setup files.

73s, Erich, DK1TB