Hello Oscar, the info you seek for Fox-1D can be found on this page:
https://www.amsat.org/getting-ready-for-fox-1d/
Best Wishes and 73,
Cal/N3CAL
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Oscar Acton via AMSAT-BB Sent: Friday, July 17, 2020 8:26 AM To: amsat-bb@amsat.org Subject: [amsat-bb] New satellite operator - M7OJA
Hello,
My callsign is M7OJA. I was tracking the Fox-1D satellite and I called out into a handheld radio with 8 watts into a collinear omnidirectional antenna on my roof when the satellite passed. I heard a station come back very clearly with "Juliet Alpha again". Unfortunately, the satellite had passed by then, but I am impressed that I managed to get in with my minimal station setup.
I would like to try to maximise the time I have to use the satellite. My handheld radio (Anytone 868) doesn't have an auto doppler shift, so I am wondering how to calculate the doppler frequencies? For example, on this link https://amsat-uk.org/beginners/how-to-work-fm-satellites/, all of the frequencies are listed to be programmed into a handheld (accounting for doppler shift). I would like a similar list of frequencies for the Fox-1D (or know how to calculate them).
Many Thanks,
Oscar M7OJA (IO94HT) _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb