Hi Alan! Very good, before I moved forward it's good to see someone getting it working, it assures me that I'm not wasting my time. I have a registered copy of MixW, but also think I left the registration key in Florida. I also have a DSP-2232, and a Symek TNC3S in Florida. I think the Symek is a 1200/9600 baud unit, but the 2232 can run 9600/9600 baud, I think. This will be fun getting them running again with WiSP :-).
How come your uplink is limited to 1k2?
73 Jeff kb2m
-----Original Message----- From: Alan [mailto:wa4sca@gmail.com] Sent: Monday, September 25, 2017 1:30 PM To: 'jeff griffin'; 'AMSAT' Subject: RE: [amsat-bb] FalconSAT-3 PacSats
Jeff,
I don't have 9600 baud TX, but I have used the MixW virtual TNC to copy the BBS and digi with WiSP and a VU5K. Looks just like 25 years ago when I was using a hardware TNC. Should work witi the any rig if you have the right soundcard interfacing. I have already have a copy of MixW, but there is a 30 demo, last time I looked.
73s,
Alan WA4SCA
<-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of jeff <griffin <Sent: Monday, September 25, 2017 09:36 AM <To: 'AMSAT' amsat-bb@amsat.org <Subject: [amsat-bb] Falconsat-3 pacsat < <I'm interested in getting back on the pacsat(s). It's been awhile, I'm <thinking about 15 years since I ran WiSP. I just installed a copy of WiSP, <but my software key is in Florida at my winter home, so I'm running the <demo. Now a few questions. < < < <1 Is anybody doing the BBS on FalconSat-3? < <2. Is so what software are you using? < <3. can someone recommend a software derived 9600 baud TNC that will talk <to <either a Flex VU5K, or an IC-9100. I would need this to work with a WiSP <like program to do the BBS thing. Thanks for helping this old guy get <restarted with pacsats. < < < <73 Jeff kb2m
.