Thanks for all the info. I think I narrowed it down to a bad cable(or connector at the rotor) between the control box and the rotor. From the info gathered the rotor itself appears to not be the problem. I will get out there tomorrow and do a quick cable check, and will know for sure.
73 Jeff kb2m
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of KO6TZ Bob Sent: Saturday, December 24, 2016 12:43 PM To: amsat-bb@amsat.org Subject: Re: [amsat-bb] bad G-5500 rotor
Jeff,
I failed to paste in the readings on the last post.
G-5500 rotor
E-4 DOWN #16 WHITE E-5 UP #16 BLACK E-6 COM #18 BLUE
E4 to e5 = 7.2 ohm E4 to E6 = 3.9 ohm E5 to E6 = 4.8 ohm
A4 to A5 = 9.7 ohm A4 TO A6 = 5.5 ohm A5 to A6 = 5.5ohm
A-4 LEFT #16 WHITE A-5 RIGHT #16 BLACK A-6 COM #18 BLUE
BOB KO6TZ
I'm back up here in the frozen north for the holidays and today had some time to work on my G-5500's azimuth problem. I took my 5500 control box up here with me from my station in Florida to help test. Now I've got it down to the Azimuth rotor itself. I used to have a repair guide for this rotor, but I haven't worked on one in many years and 2 moves ago and can't find it anywhere including online. Does anyone have a copy they could email me? I have the cable disconnected from the rotor control box. I'm interested in taking some meter readings to try to determine what parts if any to order from Yaesu. Thanks in advance.
Everyone have a very Merry Christmas, happy holiday, and a HNY.
73 Jeff kb2m _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb