Hi all,
Could anyone advise on what software I should use to decode the telemetry from EnduroSat? I should have an overhead pass tonight and would like to give it a try. The website lists this:
Modulation: 2GFSK(GMSK), Frequency deviation 2400 Hz, Speed 9600 bit/sec Preamble: 5 x 0x55, 0x55, 0x55, 0x55, 0x55 Sync word: 0x7E Packet format: AX.25 UI-bitstuffed, NRZI-encoded, G3RUH-scrambled, CRC16-CCIT
Would something like UISS with the High Speed SoundModem by UZ7HO work or is special software required?
Best wishes, Milen KG2C
On Tue, Jul 24, 2018 at 8:40 AM, Nico Janssen hamsat@xs4all.nl wrote:
Detailed doppler measurements show that EnduroSat One (downlink 437.050 MHz) is object 43551 (1998-067NZ) and EQUiSat (downlink 435.550 MHz) is object 43552 (1998-067PA).
No signals received from MemSat (downlink 437.350 MHz) and RadSat-g (downlink 437.425 MHz).
73, Nico PA0DLO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb