Thanks, I think I may just order it too anyway. Might be nice to have the extra hardware around just in case and if I don't use something, I can always save it for some other project. I have no tower, only a Rohn telescoping mast with a Cushcraft MA5B small beam on it. I'm probably going to nix the mast and move everything to a tripod mount further back on my roof. This should make everything easier to access as there is currently a pair of dogwoods near the beam that require pruning every year to keep them from tangling in the antenna. The XYL has already nixed the idea of cutting them down. Plus I feel the tripod will keep everything low enough for me to work on it easily. I do all my own antenna work, I have no one to help me. My grown son is very strong but unfortunately he is afraid of heights. I had a homebrew AZ/EL system on the mast a few years ago and the thing was a bear to raise and lower the mast and I'm not as young as I used to be. 73, Michael, W4HIJ On 3/27/2016 8:26 PM, Dave Webb KB1PVH wrote:
The separation kit doesn't come with the rotor, it's an extra set of parts consisting of the following.
S8002740 4 Units SPRING WASHER M6 S8002742 4 Units WASHER (JIS) 6X13X1.0 S8002736 4 Units HEX NUT (TYPE-1) M6 S8002739 8 Units SPRING WASHER M8 S8002741 8 Units WASHER (JIS) 8X18X1.6 S8002665 8 Units HEX NUT M8 S8002737 2 Units U BOLT M6 PE-7505-006-1 S8002738 4 Units STUD M8X115 PE-7505-016-1 S8003012 6 Units PIPE CLAMP PE-7505-060
http://www.gigaparts.com/Product-Lines/Tower-Rotator-Accessories/Yaesu-SEP-K...
Dave-KB1PVH
Sent from my Samsung S4 _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb