I can help with this question:
Glen Martin no longer offers a thrust bearing. They are suggesting use of a Yaesu GS065 as a substitute.
The 45AG4 and BPL45G both have a 3" i.d. hole where the bearing mounts. Neither the old Glen Martn bearing or the GS065 will properly cover a hole this size and you would also have to drill new mounting holes. The Rohn TB3 and TB4 fit without any modifications.
The azimuth rotor part of a Yaesu G5500 will fit the AS455G rotor plate without modifications. You will need a Yaesu separation kit to mount the elevation part of the G5500 to a mast above the top of the tower.
If you have any questions about any of this please call me at 800 272 3467.
73, Gerald Williamson K5GW Texas Towers
In a message dated 8/14/2007 9:50:57 P.M. Central Daylight Time, n4qwf1@gmail.com writes:
Look at this page and you can get there number. This is one of the best companies I have ever dealt with. My experience with them was outstanding. They will surely answer your questions and help you with whatever they can. Wish I felt the same about most other companies I have dealt with. Go for it.
73's << John
http://www.glenmartin.com/techsupport.html
On 8/14/07, Stargate stargatesg1@verizon.net wrote:
Hi all, Does anyone know if a Glen Martin thrust bearing will fit a BPL45G or 45AG4 top section without having to re-drill it?
Also, will a AS455G accessory shelf fit a Yaesu G-5500 rotor withoutre-drilling?
Thanks, RoD KD0XX
A good friend will come and bail you out of jail, A TRUE friend will be sitting next to you saying.....
"DAMN THAT WAS FUN"
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb