FIRST: Did you perform the calibration proceedure in the G-5500 manual?
SECOND: Did you go throught the calibration proceedure outlined with the tracker?
Satpc32 needs to be told explicitly (on the rotator setup page) that the rotator is 180 degree capable.
Norm n3ykf
On Thu, Oct 12, 2017 at 12:24 PM, Iapicco, Christopher iapiccoc9@students.rowan.edu wrote:
Hello,
I am attempting to use SatPC32 12.8c on Windows 7 to control a Yaesu GS-232 rotor to track my university's cubesat. All connections have been doubled checked for accuracy. In the setup, the 180 degrees max elevation is selected, along with the correct setup for the com port, and the rotor interface is set to Yaesu GS232.
For some reason, the software is only registering that the rotor has 90 degrees of elevation still. Meaning that when the rotor controller reads 180 degrees, the software reads 90 degrees. Similarly, when the controller reads 45 degrees, the software reads 90. It seems that all built in software settings have been explored and a solution for this problem cannot be found. Any suggestions?
Thanks _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb