Rich SATPC32ISS should fix you up. Look at SATPC32 in your programs folder, it should be there. I'm not sure about the TS 2000, I use Icom 910 but that shouldn't matter. With SATPC32ISS it should set your radio int split mode with the 2 frequencies that you need for voice. However if you are trying for the 145.825 simplex if you have it input in the Doppler Sqf in Auxiliary Files under the question mark on the tool bar of Satpc32 it should show up in the CAT, then click on the frequency. Clear as mud isn't it ? I may not of described it very well but if you look in these areas it may help you out. If you need more help just ask
73 John KC0BMF
On Mon, Nov 11, 2013 at 9:22 PM, Jeff Moore tnetcenter@gmail.com wrote:
ISS voice contacts are NOT simplex. They are just not cross-band. You have a different uplink and downlink frequency but within the same band similar to a conventional repeater.
You should be able to set both the software and the radio to the correct frequencies.
7 3
Jeff Moore -- KE7ACY
On Mon, Nov 11, 2013 at 6:29 PM, Rich/wa4bue <richard.siff@verizon.net
wrote:
Hi all,
The K4AMG CLUB is using the TS 2000 and SATPC32.
In SAT mode the program or the transceiver gives an uplink and down link frequency. The ISS is simplex. Is it possible to work a simplex mode to the ISS with this configuration?
God Bless
R
W4BUE _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb