I just finished up the cables for the rotor And been reading thru the manual .. ( lacking a bit )
It says 5 minutes intermittent service and something About 15 minutes rest. I assume then , that it means 5 minutes on , 15 minutes off.
Doesn't seem like it takes a whole 5 minutes to run the whole Rotation , but wanted to know if its ok to go from one end of The rotation to the other without stopping? Wanted to ask if that seems reasonable?
For setup I ran the azimuth and elevation to CCW to the stop to make sure It stopped correctly and the meter indicated correctly, then went the other way to full meter deflection, to the Stop and adjusted the Full Scale adjustment for full scale. That's all there is To it? Whats the voltage output adjustments for?
One more thing .. On a side note.. I thought it was cheesey to have "radio shack" Type terminal strips on a 600.00 rotor to connect the rotor cable too ... Why not have a couple connectors there? Even my old Wilson WR-500 had a connector. Lol
I assume even with 2 small yagis on this rotor, I will now have to guy the mast due to the Added weight of the rotor on the mast ? ( better safe then sorry LOL )
Thanks everyone ..
Randy - N2CUA