http://n3ujj.com/manuals/YAESU%20g5400b.pdf
Page 3 says 24 VDC.
I am guessing that is for full speed and then 12 VDC is half speed. The only concern I would have is that it may be expecting a motor controller to send it positive volts for turning one way and negative volts for turning the other way; right? Let me know if you figure it out. 73 Robert MacHale. KE6BLR Ham Radio License. http://www.aprsat.com/predict . http://www.spaceCommunicator.club%C2%A0 . Supporting Boy Scout Merit Badges in Radio, Robotics, and Space Exploration
On Friday, December 20, 2019, 2:09:33 PM PST, WB8PFZ via AMSAT-BB amsat-bb@amsat.org wrote:
I am trying to help out someone with a controller. The control box works manually but does not work with his Sat32 controller. I am not familiar with the software but am trying to diagnose the control box. I am assuming a few volts on the DIN connector that correlate with the relay switching transistor should cycle the relays. If my thinking is correct how many volts would I apply to the DIN pins to prove out the controller is working correctly? Hope this makes some sense. Thanks Mike WB8PFZ _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb