I have seen it work with Sat PC 32 on VO52 Arm chair copy just move the antenna once in a while. This was out doors, using a small ACER computer and arrow antenna.
I would like to try it on my ICom 720, but the data port does not work just like everything else that is satellite related to that radio. When we get a HEO I will consider replacing the 720, until then no sense in trying another radio with features that do not match the needs of the operators.
Art, KC6UQH
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Gary "Joe" Mayfield Sent: Monday, May 31, 2010 7:05 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Re: Doppler Tuning Convention Question
Tim,
Speak for yourself :-) In the 20+ years I have been a satellite operator, I have never gotten computer doppler control to work right on the linear birds. It works great on FM, but I always wind up fighting it on the linear birds. As soon as I tune the other guy in the computer moves me off frequency. It's so much easier to just listen and adjust on the fly.
Maybe there is some secret, but I have yet to be clued in... If someone wants to write a "Dummies Guide" for this I would be willing to be your test subject.
73, Joe kk0sd
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Tim - N3TL Sent: Monday, May 31, 2010 8:42 PM To: APBIDDLE@mailaps.org; 'John Belstner'; amsat-bb@amsat.org Subject: [amsat-bb] Re: Doppler Tuning Convention Question
Alan, John and all,
There is no question that computer-controlled Doppler tuning makes working the linear satellites easier. That being said, I am glad that my lack of a computer to dedicate to ham radio forced me to learn and use manual tuning by following the one true rule of always tuning the higher frequency.
These days, I often use SatPC 32 for computer control when I use my two FT-817 QRP rigs for the satellites. But last year, right after Field Day, the CAT plug on my FT-857D stopped working. Because of the choices I've made about my station setup (i.e., a totally portable station that I can set up and operate anywhere at any time), I need to use the 857 as a transmit radio in order to work the DX into Europe and Africa that I have on AO-7 Mode B. And without its higher power on 2 meters, I would not have gotten Hawaii into the log earlier this year on FO-29 from Adrian, AA5UK/KH6. Since the CAT plug died on the 857, I have been manually tuning on every pass during which I use that radio.
I really like being able to do it, even if I don't have to. I hope new satellite operators will take the time to at least develop the basic ability to effectively use manual tuning. But then - dinosaur that I am - I also wish more amateurs in general would at least learn Morse Code at slow speeds ... hihi.
And since we're on the topic ... has anyone else noticed that the latest edition of "The ARRL Satellite Handbook" uses VO-52 as the example for Doppler tuning - and that it suggests that newcomers who are manually tuning for Doppler park their transmit frequency on the UHF uplink and tune the VHF downlink (i.e., the exact opposite of the One True Rule)? That is really mystifying and disappointing.
Alan, I have no doubt that you're right about the necessity for Doppler control above Mode B satellites. Having always preferred the KISS approach whenever possible, I suppose that's why I haven't been able to get myself very excited for L- and S-band opportunities. I definitely enjoy the benefits of computer control for Doppler. I just don't much care for having no choice in using it (or not) to effectively work a satellite.
73 to all,
Tim - N3TL
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Alan P. Biddle Sent: Monday, May 31, 2010 6:07 PM To: 'John Belstner'; amsat-bb@amsat.org Subject: [amsat-bb] Re: Doppler Tuning Convention Question
John,
MacDoppler, SATPC32, Ham Radio Deluxe, and other programs all support what has been called the One True Rule. The usual name for the implementation is Full Doppler Tuning. You are doing it right. When everyone does this, it provides a very pleasant opportunity to talk instead of tune. It also keeps from drifting all over another QSO, though the transponders are seldom full these days.
However, that is not to say that people not using this are doing it wrong, exactly. There are still many rigs in use which do not have the capability for computer frequency control. In the old days, the rule was to tune the highest frequency, whether uplink or downlink, since this is where the Doppler shift is greatest. Take a look at KB5MU's original article and updates here:
http://www.amsat.org/amsat/features/one_true_rule.html
My suggestion is to use full tuning until you find that the other operator isn't. Then adapt, usually by turning off the updating for the lower frequency. It isn't worth getting doctrinaire about it. However, by using the One True Rule as the default, you set a good example and encourage the movement of other operators in this direction. As you will find, it is truly painful to do it the manual way after getting used to automagic tuning. As we move above 70 cms, full tuning truly becomes necessary.
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of John Belstner Sent: Monday, May 31, 2010 3:36 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Doppler Tuning Convention Question
I know there is a lot of discussion on this subject in the AMSAT archives, but I've recently read a few posts to the BB that have me confused.
Just this weekend I got my Sat station on the air (FT-736R w/MacDoppler) and I noticed that the MacDoppler program I use adjusts both the TX and RX frequencies during the satellite pass. I'm assuming this is to keep my signal located in the same place in the transponder. The program seemed to work quite well. I was able to copy several QSO's on VO-52 and made a couple contacts as well.
One thing I noticed is that about half the QSO's I copied did not require any manual tuning on my part (MacDoppler adjusted the RX correctly) while the other half did. According to MacDoppler, those that did require manual tuning were moving around within the transponder passband.
I've read a few posts (one as recent as today) that suggested the convention is to keep the RX frequency fixed and manually adjusting the TX frequency while monitoring the downlink. Looking through the AMSAT archives this is the old convention prior to the popularity of tracking software and CAT control. So my question is, are there two conventions? or do I not have my software configured correctly?
Sorry for what might seem like a stupid question, but I'm a newbie to this facet of Ham Radio. BTW, I'm having a blast!
Cheers,
John Belstner w9en@arrl.net
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
__________ Information from ESET NOD32 Antivirus, version of virus signature database 5158 (20100531) __________
The message was checked by ESET NOD32 Antivirus.
__________ Information from ESET NOD32 Antivirus, version of virus signature database 5160 (20100531) __________
The message was checked by ESET NOD32 Antivirus.