Hi Tom, the program updates both radio frequencies for Doppler correction as soon as the Doppler shift of the higher band changed by a certain amount of Hz (interval). You can set the interval in menu "CAT", separatedly for FM and SSB. Set the FM interval to - say - 100 Hz and the SSB interval to 50. With SO-50 the program will then update both radio frequencies when the Doppler shift of the UHF downlink changed by 100 Hz or more. 73s, Erich, DK1TB
Am 01.02.2016 um 00:45 schrieb Tom Schuessler:
Thanks to the response from the group. The V+ setting worked fine. I knew I was missing something.
The CAT control via the Virtual Serial Port Emulation software is a bit finicky and sometimes may take 5 or 10 seconds to update SatPC32 as Doppler changes, Then it will seem to catch up and be pretty current. Oh well. I think though it will work for what I need.
Thanks to all.
Tom Schuessler 2713 Lake Gardens Drive Irving, Texas 75060 972-986-7456 214-403-1464 (Cell) n5hyp@arrl.net
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb