My truck is setup for a IGATE for GO32 and ISS... So you should be able to see yourself on findu.com or aprs.fi if it hears you.
One other note. The D7 can be set to DCD-IGNORE so that it will TX as needed even though the downlink is solid data, but the D700 will not TX until the downlink drops. For FD this will be a problem since not only your's but everyone else's D700 TX's at that instant.
This is normally not a problem at all, since few people are using APRS on GO32 routinely at the same time. But for Field Day, it will be better to force your TX while the downlink is up, so that you won't collide with anyone else... To do this, simply QSY the downlink knob for a split second so your TX will get out. You have to tune the downlink for Doppler anyway...
See http://www.ew.usna.edu/~bruninga/GO32-ops.html
Bob, Wb4APR
Quoting Robert Bruninga bruninga@usna.edu:
hello folks, anyone copy or hear go-32 this am pass? anyone hear me xmit? I use to be able to copy this sat good. wondering if my station is working on 9600 baud. had a good 85 degree pass
Digipeater was working great. From my station in Maryland,
I
saw only one other station, myself and K3PDK. My passes
over
Maryland, (today,24 June) were at 0825, 1005 and 1145 EDT.
Bob, WB4APR
Sent via AMSAT-BB@amsat.org. Opinions expressed are those
of the author.
Not an AMSAT-NA member? Join now to support the amateur
satellite program!
Subscription settings:
http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: