Hi Dave!
Direct from the SatPC32 Website...(Read the last line)
The frequency- and mode-control works with the following radios:
Yaesu transceivers FT-736R, FT-847, FT-817, FT-857 and FT-897,
Kenwood transceivers TS-790E/A and TS-2000,
ICOM transceivers IC-820, IC-821, IC-910H und IC-9100,
ICOM receivers and transmitters, that work with the same cat protocol (i.e. IC-275, IC-475).
Also states it does on the FAQ
73, Bob, WB4SON
On Tue, May 9, 2017 at 4:40 PM, Paul Stoetzer n8hm@arrl.net wrote:
It should work as it uses Icom's CI-V protocol. Even my Icom IC-R10 handheld receiver, which also uses CI-V, works flawlessly with SatPC32.
73,
Paul, N8HM
On Tue, May 9, 2017 at 4:37 PM, n4csitwo@bellsouth.net wrote:
I have a school that I'm mentoring that needs to know if SATPC32 can be
used to control an Icom IC-275H.
Has anyone had experience with doing this and can confirm it will work?
Thanks, Dave, AA4KN ARISS mentor
This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb