Thanks to all who responded so far. These are the frequencies as I understand them:
145.92 435.310 not needed for low passes 145.92 435.305 145.92 435.300 145.92 435.295 145.92 435.290 not needed for low passes
qrp repeater
145.88 435.160 145.88 435.155 145.88 435.150 145.88 435.145 145.88 435.140
Does ao-51 need a tone?
also qrp. is that on the satellite end or the ground station end? (to use the qrp mode do I need flea power and a wet string or an LNA cooled by liquid helium and a 305M dish? - ok I'm being facicous but you get the idea...)
Eric af6ep Eric af6ep
On Sun, Nov 9, 2008 at 2:48 PM, Andrew Glasbrenner < glasbrenner@mindspring.com> wrote:
You are likely to get some varying answers, but 145.92 paired with 435.310, .305, .300, .295, and .290 for the normal repeater, and 145.88 with 435.160, .155, .150, .145, .140 for the qrp repeater when active. Some folks like to put in the uplink +/- 5khz Doppler shift too, but it's really fine either way.
73, Drew KO4MA
----- Original Message ----- From: "Eric Fort" eric.fort@gmail.com To: "AMSAT-BB" amsat-bb@amsat.org Sent: Sunday, November 09, 2008 5:40 PM Subject: [amsat-bb] ao-51 radio programming
I have a vx-6 I'd like to set up to work ao-51. what frequency pairs
should go into the memories?
Eric _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb