That should work fine. RT Systems even advertises the cable as "Programming/CAT”. While the site does say that the drivers are installed with the programming software, they also have the link to the driver-only download on the product page. I’ve used an RT Systems cable that was designed to program radios with Icom CI-V for satellite control (of Icom radios, of course) with no issues. I didn’t even need drivers, but I was on Linux and didn’t try on Windows.

Luke - AE5AU

On Nov 7, 2023, at 16:18, Joseph Amato via AMSAT-BB <amsat-bb@amsat.org> wrote:

Hi, Everyone. I’m relatively new to satellites, so my questions are pretty basic. I just purchased a new laptop running Windows 11, and will use it to run SatPC32 to control a Yaesu FT897D and a Yaesu FT857D for duplex operation. Are the USB-62C cables from RTSystems the right choice for this? Also, do I need to purchase the ADMS-4B software package to install the right drivers? I’ll probably never use most of its features.

I’ve been a ham since I was in 8th grade, but that was in 1958, and I’ve only recently returned to the hobby. As you might expect, I’m “digitally-challenged.” Thanks for any information you can offer.

Joe
K1MNY

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org