[amsat-bb] SATPC32 - Is there a way to adjust downlink only?

Hi,

I'm using an Icom IC-9100 and the RIT control is almost useless as it changes frequency very slowly. To change 1 KHz takes about 15 seconds, a lifetime on a pass. In other words if a station calls me and they are a KHz off, then they will be off the air before I can get the RIT set.

I'm running SatPC32 v 12.8d. The manual implies that there are Downlink adjustments when the V+ mode is turned on, but I only see uplink adjustments to the right of the frequency display that can either be moused up/down, or respond to the +/- keys.

Perhaps there is something else that would open Downlink adjustment to the left of the display? Or maybe other keys that adjust the Downlink?

73, Bob, WB4SON