ITUpsAT1 is on 437.325 MHz CW
UWE-2 is on 437.385 MHz, 1200 bps Ax.25 packet
BEESAT is on 436.000 MHz CW using the call DP0BEE
SwissCube is on 437.505 Mhz CW using the call HB9EG/1
On 9/23/2009 3:12 PM, Andrew Rich wrote:
Frequencies please
Actually, make an email template of satellites heard
Or use my website
http://vk4tec.no-ip.org/sat_status/
Andrew Rich Airways Technical Officer Grade 4 Surveillance - RADAR ADS-B Amateur Radio Callsign VK4TEC email: vk4tec@tech-software.net web: www.tech-software.net ----- Original Message ----- From: "Mike Rupprecht"mail@mike-rupprecht.de To:amsat-bb@amsat.org Sent: Wednesday, September 23, 2009 11:32 PM Subject: [amsat-bb] Cubesats heard
ITUpSat 12:54 UTC 30 deg pass - spread CW signal
itupsat hr ta1ks itupsat hr ta1ks
SwissCube 12:47 UTC hb9eg/1 - at4 - uvu4vue - vttutvtvb - hb9eg/1
BeeSat - 12:56 UTC strong 4k8 GMSK signals till LOS
See here:http://www.dk3wn.info/p/ http://www.dk3wn.info/p/
73, Mike
DK3WN
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.112/2389 - Release Date: 09/22/09 17:54:00
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb