Hi Shamai,
1) Do the front buttons on the LVB Tracker control the rotor? 2) Check the wiring to the LCD display (one bad connection can easily cause this) 3) If it is not an LCD wiring problem, I would suggest programming another PIC chip.
73, Gould, WA4SXM ----- Original Message ----- From: "Shamai Opfer" shamai.opfer@gmail.com To: AMSAT-BB@amsat.org Sent: Tuesday, July 13, 2010 4:58 PM Subject: [amsat-bb] an issue with LVBTracker
Hi all,
After many months (Actually years) of good and flawless service, My LVB Tracker woke up one day with the display showing Z|||Z|||Z||| or sometime >|||>|||>|||>|||...
I tried several things: reset, checking the internal 5V supply voltage, etc..
I tried to reprogram the PIC using the PicProg program, but got only this reponse: "chip not recognized".
I followed the instructions in the document BuildingtheLVBTrackerv2.pdf (dated Dec 29, 2007) but no success
Any idea? anyone?
Pictures enclosed
73 & thanks,
Shamai 4Z1WS
--------------------------------------------------------------------------------
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb