Quick progress report.
After deleting KB4103718 and resetting the rotor position change to 3 degrees, I have not seen a stall in a week. I will open that out a degree at a time, and see what if anything happens.
73,
Alan WA4SCA
<-----Original Message----- <From: Alan [mailto:wa4sca@gmail.com] <Sent: Wednesday, May 30, 2018 11:44 AM <To: 'Erich Eichmann' erich.eichmann@t-online.de; <'APBIDDLE@MAILAPS.ORG' APBIDDLE@MAILAPS.ORG; 'AMSAT- <BB@amsat.org' AMSAT-BB@amsat.org <Subject: RE: [amsat-bb] Help with SatPC32 Labjack Yaesu 5500 rotator control < <Erich, < <So far the stalls have occurred in the middle of the night. One was showing <the elevation at 4 degrees, with the target at 0. The Labjack server was <indicating a down command. I closed and restarted SatPC32 and when I <selected Park, it dropped to 0 and the desired azimuth. The second time was <an azimuth problem, with a large difference between the commanded and <actual position. The Labjack server was indicating a turn. Closing and <restarting cleared the problem. < <There are two changes that I know of. I recently changed the rotor position <change window from 3 degrees to 10 degree to reduce wear, as that is close <enough for LEOs. I have reset that to 3 degrees to remove the variable. < <Mark, G0MGX suggested that I look at KB4103718, which has been reported to <be causing some USB issues. I have removed it, and will see what happens. If <it happens again, I will get more details. It certainly looks like something in the <OS rather than SatPC32. < <73, < <Alan <WA4SCA < < < <<-----Original Message----- <<From: Erich Eichmann [mailto:erich.eichmann@t-online.de] <<Sent: Wednesday, May 30, 2018 11:06 AM <<To: APBIDDLE@MAILAPS.ORG; AMSAT-BB@amsat.org <<Subject: Re: [amsat-bb] Help with SatPC32 Labjack Yaesu 5500 rotator control << <<Hello Alan, Nick and others, <<I didn't make any changes with ServerLabjack. The file is unchanged <<since Dec. 12. 2012. SatPC32 itself only outputs the target positions <<to ServerLabjack. Only this file then checks whether the rotors have <<reached the target positions. <<Is there any correlation between updating the target positions by <<SatPC32 and stalling of the rotor? << <<I also use Windows 7, 64-bit and the Labjack U-12 with a KR-5600. <<Lately I used it for multiple satellite passes and I just tested full <<360° turns of the az. rotor/ 90° turns of the el. rotor in both <<direction (entered target postions in menu "Rotor"). No issues so far. <<73s, Erich, DK1TB << <<Am 30.05.2018 um 16:18 schrieb Alan: <<> Same here, beginning a week or so back. Investigating, but so far nothing <<> determined. Using WIN7 64-bit, and wondering if there was something in <<the <<> recent updates. <<> <<> 73, <<> <<> Alan <<> WA4SCA <<> <<> <<> <-----Original Message----- <<> <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of <<Nick <<> <Pugh <<> <Sent: Wednesday, May 30, 2018 08:54 AM <<> <To: 'Amsat BB' AMSAT-BB@amsat.org <<> <Subject: [amsat-bb] help with yaesu 5500 rotator <<> < <<> <Hello Amsat-ers <<> < <<> < <<> < <<> <I am using an Yaesu 5500 rotator controlled by a Lab jack under Satpc32 <<> <v8.1. Intermittently the rotator stall under computer control. The LED on <<> <the lab jack indicate a signal to control the rotator to move but no <<> <movement. Terminating Satpc32 the rotator works normal. Suggestions?? <<> < <<> < <<> < <<> < <<> < <<> < <<> < <<> <Nick k6qxj <<> < <<> <_______________________________________________ <<> <Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum <<available <<> <to all interested persons worldwide without requiring membership. <<Opinions <<> <expressed <<> <are solely those of the author, and do not reflect the official views of <<> AMSAT- <<> <NA. <<> <Not an AMSAT-NA member? Join now to support the amateur satellite <<> <program! <<> <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb <<> <<> _______________________________________________ <<> Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum <<available <<> to all interested persons worldwide without requiring membership. <<Opinions expressed <<> are solely those of the author, and do not reflect the official views of <<AMSAT-NA. <<> Not an AMSAT-NA member? Join now to support the amateur satellite <<program! <<> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb