11 Feb
2016
11 Feb
'16
10:44 a.m.
I'll add another little trick. I tested this and it works.
Make a second DOPPERL.SQF line for AO-85 with the FMD,FM option. You will still be able to decode and work the pass at the same time.
73 Clayton W5PFG
On 2/10/2016 21:52, Frank Westphal wrote:
Thank you to everyone who contributed suggestions on how to setup the radio and software to decode the telemetry. I finally was able to decode a pass this evening and that would not have happened with the help from the AMSAT-BB. Several items needed to be corrected.
- Turn on menu item 57 (9600 Baud) on IC-9100.
- Put IC-9100 into FM Digital mode by holding down the FM button.
- Set the sound card to 48,000 Hz. to match the FOXCOM software.
- Use line in on the sound card.
73, Frank K6FW