Jack,
O\OREOS,437.3050,AX.25,NOR,0,0;1200 Baud
It normally appears in the Keps as OOREOS. They must match exactly for SATPC32 to match the two, unless you use the AMSATNAMES.TXT file. Also, AX.25 is the way it sends data, not the mode your radio should be tuned for, FM. Finally, the data is entered in the wrong order. It should look something like this:
OOREOS,437.305,0,FM,,,0,0,1200 Baud
I don't follow O\OREOS, but this should get you closer. Perhaps someone who does can paste in his known working configuration. There is a good discussion at the end of the DOPPLER.SQF file of the allowable modes, etc.
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Jack Barbera Sent: Monday, June 20, 2011 1:02 PM To: Amsat Reflector Subject: [amsat-bb] Fw: O\OREOS Help
Jack WA1ZDV
----- Forwarded Message ----- From: Jack Barbera barberaalderwood@yahoo.com To: "amsat-bb-request@amsat.org" amsat-bb-request@amsat.org Sent: Sunday, June 19, 2011 2:58 PM Subject: O\OREOS Help
Need a little help.Trying to add O\OREOS to my Doppler.SQF file in note pad. Have entered O\OREOS,437.3050,AX.25,NOR,0,0;1200 Baud This does not work for me.What did I do incorrectly?Can anyone help? Thanks Jack WA1ZDV _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb