I have a few weatherproof outdoor enclosures available. These were used in the electric utility industry to enclose controls for switchgear. All connections go through the bottom panel. Minimum internal dimensions are approximately 17" x 15" x 9", weight is ~50lbs. The cabinets are made of steel with a neoprene gasket & drip lip around the front door; the gasket might need some attention as these cabinets are ~40 years old. The cabinets have a mounting bracket along the rear that extends above and below the back panel. The front door can be pad locked. There is an internal panel that swings out and it can be removed if desired. There is a 120 VAC duplex outlet & a screw terminal strip inside on the raised, drilled and tapped back panel. All the internals are still in the cabinet, new owner can strip out what isn't needed...it'll take an hour or less. These cabinets are great for remotely located antenna connections, antenna match units, switches, power amps, etc. $60 each, 2 available.