Thanks Alan,
I have installed (as administrator) SatPC32 under Windows 7 64bit and have selected the Model, Baudrate and Addresses. For some reason it does not tune the radio. I can see that the COM port for the CI-V interface is busy while SatPC32 is running, but its not tuning the radio. The radio tunes partially from HRD, as HRD only tunes the downlink frequency, not the uplink.
Now I'm wondering if I purchased the wrong radio! Anyone using an ICOM IC-821H and have the tuning working correctly? I could really use some help/advice.
Paul Delaney paul.hamradio@verizon.net http://k6hr.dyndns.org:8080 ----- Original Message ----- From: Alan P. Biddle To: 'Paul Delaney - K6HR' ; amsat-bb@amsat.org Sent: Sunday, February 06, 2011 3:15 PM Subject: RE: [amsat-bb] Doppler Tuning IC-821H
Paul,
Give SATPC32 a look. It supports the rig, and should do a very good job for you. You can download a trial version to verify it does what you want.
http://www.dk1tb.de/indexeng.htm
Alan WA4SCA
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Paul Delaney - K6HR Sent: Sunday, February 06, 2011 12:06 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Doppler Tuning IC-821H
I just acquired an ICOM IC-821H as I plan to build a satellite capable station. I cannot get HRD to tune both uplink and downlink. Seems the CAT commands in the ICOM don't exist or are not supported.
Am I stuck turning the dial manually on this radio, or is there another program that can tune both the 2m and 70cm on an IC-821H?
Paul Delaney - K6HR paul.hamradio@verizon.net http://k6hr.dyndns.org:8080
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb