All of the above can be handled by an Arduino or compatible board that has a wifi or Ethernet module. I did it with an Adafruit Feather M0 and TFT feather wing. I started development on the auto update of keps from AMSAT using a wifi version of the board. I had to pack all that stuff up when I relocated out of Los Angles but now that I have to deal with winter I plan to get back to some of these projects that are collecting dust. You can have a look at one of my posts on twitter here https://twitter.com/w8lid/status/894272192480911360
73, Mike Diehl W8LID
On Nov 1, 2017, at 12:31 PM, Andrew Rich vk4tec@internode.on.net wrote:
Hello
I used to make use of predict using scripts
Since then the raspberry pi and arduinos have come along
What LINUX satellite tracking program could be queried or send data about
Satellite elevation and angle
Satellite doppler frequency
I want to make a multi satellite radio and rotor control box with auto update keeps
I want to use perl to do the hard work
I want an arduino or the Pi to do the doppler and rotator
Andrew _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb