Thanks Greg ! Got one now so I think I am all set. Bought a 736R sold my 9700 so looking to getting back into the linear sats again 73 JACK KC7MG
On 01/01/2024 5:34 PM EST Greg D ko6th.greg@gmail.com wrote:
The CAT interface on the 736R uses TTL signal levels, so if you're up to some wiring, one of the "TTL Serial USB Adapter" available on the Internet should work. Just need 2 wires - Tx data from the dongle to the rig and ground. USB on the other end.
Back when I was using that rig for satellite work, I made my own using a simple NPN transistor and a few-K ohm resistor, driven by an old PC's serial port. You could do something like that from a regular (RS-232) dongle.
Greg KO6TH
alex weimer via AMSAT-BB wrote:
I am looking for a Cat Control Cable with Chipset in it for a Yaesu FT736R If anyone out there has one that isn't needed or wishes to sell please contact me. Thank You JACK KC7MG Good in Qrz.com