[AMSAT-BB] G5500DC Rotator Failure

I’ve had the rotator about two years and use it with antennas in the attic. Everything is working normally except the az meter on the controller no longer registers. The controller runs fine and the az and el motors are moving as they should. Fox Delta displays az and el properly, and matches what SatPC32 is telling it. But no reading on the G5500DC az meter anymore. The el meter remains fine. I can’t find a schematic for the DC version of the 5500. Anyone else had this problem and cured it? 73, Ray KN2K

Sent from the all new AOL app for iOS