No, none.
The rotor works while using SatPC32 and the LVB tracker…maybe I used it for more than 5 minutes per the doc?
From: Stefan Wagener [mailto:wageners@gmail.com] Sent: Sunday, December 04, 2016 5:49 PM To: Rafael Pena pinoleronica@hotmail.com Cc: amsat-bb@amsat.org Subject: Re: [amsat-bb] Yaesu G-5500 Control Box Problem
Any loose cables in the back of the control box?
Stefan
On Sun, Dec 4, 2016 at 4:46 PM, Rafael Pena <pinoleronica@hotmail.commailto:pinoleronica@hotmail.com> wrote: ...and suddently, the analogue display of the Yaesu G-5500 (Elev / Azim)...I mean the needles stopped moving. Neither the Elevation nor the Azimuth needles are moving at all but the rotor is working when tracking with SatPC32 / LVB.
Any hints on repairs are / will be appreciated.
Who repairs this control boxes?
Thanks
Rafael / NN3RP
_______________________________________________ Sent via AMSAT-BB@amsat.orgmailto:AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb