Well, 54mm is so close to 2-1/8" that it wouldn't matter. Either would fit, and the 54mm muffler clamps I found also state they work for 2-1/8" pipes.
And I anti-sieze *everything8!
73, Jim
On 07/04/2011 01:07 AM, Stan, W1LE wrote:
Hello Jim,
I would go to Yaesu (Standard Vertex USA) parts to get the exact ones needed.
I have always had problems trying to find SAE u-bolts to fit a metric device.
Be sure to grease the threads when applying, so they do not rust up and seize.
Stan, W1LE
On 7/3/2011 3:19 PM, Jim Jerzycke wrote:
Greetings, all
I'm "improving" my elevation rotor setup, and I'm wondering what others are using to secure the cross-boom inside the elevation rotor.
I've been using stainless hose clamps, and they work kinda-sorta OK, but have a tendency to slip. I'd really like to get either some proper size u-bolts, or the part numbers from the clamps Yaesu supplies with the rotor.
They appear to be 54mm / 2-1/8" inside-the-legs, and I'm coming up blank on searching for some.
There are no part numbers for the clamps in the manuals I have for the rotors.
I have FOUR elevation rotors, and NO clamps!
Seems like the clamps always get lost when people take these apart to sell.
Thanks!
73, Jim KQ6EA _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb