Hi Lowell, K9LDW
I would buy another 50' of control cable and joint it to the actual 100' on hand control cable lenght to make 150' in total and get the rotor control box in the shack.
In this case I will see the instrument of control box running and more important any necessary adjustement of the control box installed in the shack will be easier then walking from the shack to the garage after any turn of screwdriver.
Why to complicate the life with not necessary and more costly Semi-remoting solutions if 50' of additional control cable costs less ?
73" de
i8CVS Domenico
----- Original Message ----- From: "Lowell White" whiteld@usa.net To: amsat-bb@amsat.org Sent: Friday, August 21, 2009 7:21 PM Subject: [amsat-bb] Semi-remoting the controller for a Yaesu G5400
My Yaesu G-5400 rotor pair is about 150' from my shack.
I am wanting to gauge the feasibility of putting the rotor controller
within
100' (due to on-hand control cable lengths) of the antennas (in a garage).
I would then run a separate (on-hand) PC-controller cable (fewer
conductors as
using the DIN interface on the back of the controller) to the rotor
controller
box from a PC and adapter / interface (if needed) in my shack (approx.
50').
Is it crazy to consider or should I just pony up for more of the (dual)
rotor
control cable and run the control box itself in my shack?
What would I need to do at the PC end to appropriately 'signal' the 'semi-remote' control box.
Ideas?
Thanks,
Lowell K9LDW
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb