What ver of PCSat32 are you running Dick? In latest ver 12.8a you can setup 4 different configurations. I used to run two or three different copies, but with the new stored configuration ver you now don't have to...
73 Jeff kb2m
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Richard Ferryman Sent: Sunday, December 19, 2010 12:46 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Two configurations of SatPC32 ?
I use SatPC32 configured for two FT-817 transceivers for cross band duplex working. One rig is on the 2m aerial and the other on the 70cm aerial with a transfer switch for V/U or U/V. I have to switch the configuration to one transceiver and reboot for in-band simplex such as packet on ISS. Is possible to have two installations of SatPC32 or two configuration settings so I can just boot the configuration I need - (one radio or two radios)? Richard (Dick) G4BBH _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb