Thank you, John. Understood now
73, Ted
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of John Kludt Sent: Thursday, December 20, 2018 4:33 AM To: Bob Cc: AMSAT-BB; Ted Krempa Subject: Re: [amsat-bb] FW: Doppler file
Ted,
Have the above answered your questions? Seems to me two different issues have been mixed here as the Keps and Doppler.sqf are two different items and updating one does not up date the other
1. The Keps can be updated from a number of sources to be found on the drop down under the <Satellites> tab 2. Doppler.SQF is manually updated by you when a new satellite is added to the family using Notepad or some kind of text editor. Be sure to follow the rules embedded in Doppler.SQF when messing with the file. You can save a copy that has not been modified the the Uplink calibration process as Doppler.REF or some such thing. And, yes, each radio has slightly different calibration offsets in Doppler.SQF. That is what I use the 4 different configuration options for <Setup><Configurations>. I use one config for a pair of FT-817's another for an IC-910H and a third for Flex 6600. 3. Don't forget if you are adding a new FM satellite to Doppler.SQF you also need to go into Subtones.SQF and add the new satellite to that list as well so the T0 > T1 >T2 toggle works correctly. Again follow the embedded instructions carefully. This is another file that can be manipulated with a text editor like Notepad.
Hope this helps,
John
On Wed, Dec 19, 2018 at 6:59 PM Bob WB4SON@gmail.com wrote:
Hi Ted,
As nice as it would seem, it really isn't possible to automatically update the DOPPLER.SQF file. The most important reason is that each station has a different transmit and receive offset due to different RX and TX chain frequency calibration, drift, etc. It would be possible to have a baseline SQF file (without compensation) and a few hams do publish that.
You can manually update the Kep files yourself.
73, Bob, WB4SON
On Wed, Dec 19, 2018 at 6:36 PM Ted Krempa k7trkradio@charter.net wrote:
Hello, can anyone else answer my question below.....(Joanne must be busy)
Thanks, Ted K7TRK
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Ted
Krempa
Sent: Monday, December 17, 2018 3:49 PM To: 'JoAnne Maenpaa'; 'Dave' Cc: amsat-bb@amsat.org Subject: Re: [amsat-bb] Dobbler file
Good stuff, Joanne...thanks
One thing, though, that I have never understood, however: Does SatPC32 properly update keps and the sqf data when the 'update' option is used in the program? Or do we need to keep updating manually. I can understand
with
a new sat, manually trying to find the right data, but after the sats are rolling along for a few weeks the normal sites that identify keps usually have that data current.
Thanks for any input
73, Ted K7TRK
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of JoAnne Maenpaa Sent: Monday, December 17, 2018 5:54 AM To: 'Dave' Cc: amsat-bb@amsat.org Subject: Re: [amsat-bb] Dobbler file
Perhaps these messages from the amsat-bb from a few weeks ago might offer a starting point?
https://www.amsat.org/pipermail/amsat-bb/2018-October/069839.html https://www.amsat.org/pipermail/amsat-bb/2018-November/070451.html
-- 73 de JoAnne K9JKM k9jkm@amsat.org
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Dave Sent: Monday, December 17, 2018 7:40 AM To: James McIrvin Cc: amsat-bb@amsat.org Subject: Re: [amsat-bb] Dobbler file
I’m not sure if you received a private response but I have a similar
issue.
I tried to use SatPC32 the other day and found many of the satellite frequencies were not correct. I’m going to have manually edit a bunch
of
them unless I can find someone with a good set of files.
Dave N2OA
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb