It just supports switching between RHCP and LHCP.
Bruce WA3SWJ
At 02:48 PM 4/23/2010, you wrote:
Is this M2 mod for LHCP or RHCL only, or are the linear polarizations possible also ?
Stan, W1LE
On 4/22/2010 9:31 PM, Bruce Semple wrote:
Pete - I have had one for about 1 1/2 years - on the 70cm antenna. When the GO-32 9K6 BBS board was up it made the difference between reliably receiving and not. (I am working on getting on the AO-51 BBS) I know S meter readings are all relative -- I usually see at least +20 when the polarization is correct. I have roof mounted antennas so I was able to do the modification without taking the antenna down. I did shift the antenna mounting position on the boom to account for the extra length/weight. During installation checkout - I did have an issue with the protection diode that was installed across the relay -- I had to replace it. Other than that -- it has worked fine.
73, Bruce WA3SWJ
At 10:48 AM 4/22/2010, you wrote:
Hello,
I've been asked by a club member if anyone has any experience using an M2 VHF/UHF Polarization Switch, and what their opinion of it may be. I can't seem to find any reviews on field performance, thank you.
73's Pete WB2OQQ www.massapequanyweather.com
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb