2 Feb
2012
2 Feb
'12
6:36 p.m.
I had this question posted to me, and I can't seem to figure out if it is possible.
.I want my rotator to stop at about 85 Deg elevation and not go to 90 ,
100 , 110 etc etc but to rotate on its asmith by >180 deg and then start to drop elevation from 85 Deg..
I know that the rotor interface unit, ERC can be limited via it's service tool software, but I wasn't sure how SatPC32 would react to the interface unit limiting it.
Dave - KB1PVH