In about 2 weeks I'll have an AZ and EL on the bench and check measurements.
All the bolts on my Yaesu/Kenpro 5400 rotators are metric so the shaft on the pot may also be metric.
We will see.
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of George Burr Sent: September 15, 2008 9:03 PM To: amsat-bb@amsat.org Subject: [amsat-bb] replacement pots
I found the pots on the old Kenpro rotors to be none standard. The mounting hole and the turning shaft are smaller than standard and this could require some more work to fit a "standard " pot because of the gearing. I don't know if this is true for the G5400. 73 Geo. Amsat# 26245
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb