Tnx to everyone who responded to my polarity switch post......Will take it all in on advisement.....I already had constructed one but did not like its performance.  It was very similar to Dino's, but I think his is much better.....May incorporate some of the other ideas  as well.  

TNX AGN......

JERRY   KJ4EU

On Friday, April 9, 2021, 05:55:21 PM CDT, Gary <[email protected]> wrote:


I ran CAT5 cable with my coax up the mast. I picked out wires to power the preamps and polarity switches. I had a row of toggle switches allowing me to turn each preamp on or off, and switch polarity on the antennas. It all worked very well. I miss those AO-10, 13 and 40 days.

 

I have pictures of the satellite antennas here:

http://www.kk0sd.net/sattower/sattower02.htm

 

But never took a picture of the switches….

 

73,

Joe kk0sd

 

From: BeetleJerald Oliver <[email protected]>
Sent: Friday, April 9, 2021 1:18 PM
To: AMSAT BB <[email protected]>
Subject: [AMSAT-BB] DC Switch for M2 Polarization Antenna Switch

 

Just wondering if anyone has ever devised  a 12 Volt DC Switch console at the operating position to send 12V to the Polarization switches on the CP yagis at the tower?

 

would toggle switches be okay for that or should I use relays instead?  Also like to use LED indicators for visual settings......

 

Any thoughts ?

 

73

 

Jerry   KJ4EU


-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/[email protected]
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org