Ted,
There is a window that allows you to download and update the Keps. Any changes to the sqf files for new satellites or modes are performed by you manually.
73, Steve N9IP -- Steve Belter, seb@wintek.com
On Dec 19, 2018, at 7:00 PM, Bob WB4SON@gmail.com wrote:
Hi Ted,
As nice as it would seem, it really isn't possible to automatically update the DOPPLER.SQF file. The most important reason is that each station has a different transmit and receive offset due to different RX and TX chain frequency calibration, drift, etc. It would be possible to have a baseline SQF file (without compensation) and a few hams do publish that.
You can manually update the Kep files yourself.
73, Bob, WB4SON
On Wed, Dec 19, 2018 at 6:36 PM Ted Krempa k7trkradio@charter.net wrote:
Hello, can anyone else answer my question below.....(Joanne must be busy)
Thanks, Ted K7TRK
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Ted Krempa Sent: Monday, December 17, 2018 3:49 PM To: 'JoAnne Maenpaa'; 'Dave' Cc: amsat-bb@amsat.org Subject: Re: [amsat-bb] Dobbler file
Good stuff, Joanne...thanks
One thing, though, that I have never understood, however: Does SatPC32 properly update keps and the sqf data when the 'update' option is used in the program? Or do we need to keep updating manually. I can understand with a new sat, manually trying to find the right data, but after the sats are rolling along for a few weeks the normal sites that identify keps usually have that data current.
Thanks for any input
73, Ted K7TRK
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of JoAnne Maenpaa Sent: Monday, December 17, 2018 5:54 AM To: 'Dave' Cc: amsat-bb@amsat.org Subject: Re: [amsat-bb] Dobbler file
Perhaps these messages from the amsat-bb from a few weeks ago might offer a starting point?
https://www.amsat.org/pipermail/amsat-bb/2018-October/069839.html https://www.amsat.org/pipermail/amsat-bb/2018-November/070451.html
-- 73 de JoAnne K9JKM k9jkm@amsat.org
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Dave Sent: Monday, December 17, 2018 7:40 AM To: James McIrvin Cc: amsat-bb@amsat.org Subject: Re: [amsat-bb] Dobbler file
I’m not sure if you received a private response but I have a similar
issue.
I tried to use SatPC32 the other day and found many of the satellite frequencies were not correct. I’m going to have manually edit a bunch of them unless I can find someone with a good set of files.
Dave N2OA
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb